Skip to main content

Stultz Plumbing

Solar Pool Heater Installation Cost Calculator & Savings for San Antonio Homes

Find solar pool heater costs in San Antonio, system types, installation steps, rebates, and what affects the final price. Maximize efficiency and savings.

JZ
February 25, 2026  ·  24 min read
Solar Pool Heater Installation Cost Calculator & Savings for San Antonio Homes

Find solar pool heater costs in San Antonio, system types, installation steps, rebates, and what affects the final price. Maximize efficiency and savings.

You love your pool. But you hate watching it sit empty for months because the water feels like ice.

Here’s the thing most San Antonio homeowners don’t realize: you don’t have to choose between a usable pool and a manageable energy bill.

Solar pool heaters solve both problems at once. They use the same San Antonio sunshine that makes your summers so intense to warm your pool water naturally. No gas bills. No steep electricity costs. Just free energy from the sun doing exactly what it already does here 220 days a year.

But before you commit, you need real numbers. You need to understand what a system actually costs to install, what you’ll genuinely save over time, and how to figure out whether it makes financial sense for your specific pool and budget.

That’s exactly what this guide covers.

We’ll walk through how solar pool heaters actually work, what types of systems are available, what drives installation costs up or down, and how solar stacks up against gas and electric heating in real dollar terms over the life of the system.

Ready to stop guessing and start making a smart decision? Let’s get into it. And if you want a free assessment for your San Antonio home, contact Stultz Plumbing today.


Key Takeaways From Solar Pool Heater Installation Cost Guide

Here’s your quick snapshot before we dig into the details.

Solar pool heaters are simpler than you think. They use collector panels, a pump, a filter, and a control system to circulate your pool water through sunlight and return it warmer. No complicated technology. No batteries required.

The myths are holding people back unnecessarily. Solar heaters work on cloudy days, extend your swim season well beyond summer, and have been a proven technology for decades. The concerns most homeowners have are based on outdated information.

Upfront costs range from $4,000 to $7,000. That’s higher than gas or electric heaters at the outset, but the operating costs are almost nothing. Most San Antonio homeowners recover their investment in 3 to 5 years.

Flat-plate direct circulation systems are the best value for San Antonio. Given our climate, you don’t need the most expensive collector technology. The right-sized system installed correctly delivers excellent results without overpaying.

Solar saves serious money long-term. Compared to gas heating over 15 years, solar saves approximately $14,000. Compared to electric, that number jumps to over $26,000.


Solar Pool Heater Basics and Misconceptions

Let’s start by clearing up the confusion, because there’s a lot of it around solar pool heating.

Most homeowners who haven’t looked into this seriously are working off assumptions that aren’t accurate. And those assumptions are costing them money every single swimming season.

Here’s how a solar pool heater actually works.

It’s simpler than most people imagine. Your pool water already circulates through a pump and filter system every day. A solar pool heater taps into that existing circulation and adds one additional loop through collector panels mounted on your roof.

Water pumps up to the collector panels. The sun heats the panels. The water passing through picks up that heat. The warmer water returns to your pool. That’s the entire process.

The system has five main components working together:

Solar collector panels mounted on your roof that absorb the sun’s energy and transfer heat to passing water. A circulation pump that moves water through the collectors continuously during peak sun hours. A filter that keeps debris out of the system and your pool. A control system with a thermostat that monitors temperatures and decides when the pump should run. And check valves that prevent water from flowing backward through the collectors at night and losing heat instead of gaining it.

That’s it. No exotic technology. No complex chemistry. Just physics doing its job.

What makes San Antonio particularly ideal for this.

We average 220 sunny days per year. Our summers are long and intense. Even our winters are mild compared to most of the country. That combination means a solar pool heater in San Antonio gets more productive hours per year than the same system installed almost anywhere else in the United States.

Most San Antonio homeowners with a properly sized system report temperature gains of 8 to 15 degrees above what an unheated pool would sit at naturally. If your pool naturally holds at 75 degrees, solar heating pushes it to 83 to 90 degrees during the season. That’s the difference between a pool you avoid and a pool you use every day.

Now let’s tackle the myths directly.

These are the ones that come up constantly, and every single one of them deserves a clear answer.

Myth one: Solar heaters don’t work when it’s cloudy.

They work. They just work at reduced efficiency on overcast days. Diffuse sunlight still carries energy, and that energy still heats your collector panels. You won’t get the same temperature gain on a cloudy day as you will on a blazing July afternoon, but your pool will still warm up. And in San Antonio, with 220 sunny days per year, you’re working with an enormous amount of ideal heating days.

Myth two: This is brand new technology that hasn’t been proven yet.

Solar pool heating has been around for decades. It’s one of the most mature and well-understood solar applications available. Thousands of San Antonio homeowners already use these systems successfully. The technology is as proven as it gets.

Myth three: You need batteries to store solar energy for pool heating.

This misconception comes from confusing solar electric systems with solar thermal systems. Solar pool heaters don’t generate electricity. They generate heat. And your pool stores that heat naturally. The water holds warmth. No batteries needed. No storage systems required. Your pool is the storage tank.

Myth four: Solar heaters only work during summer.

This one is particularly costly for San Antonio homeowners who believe it, because it means they’re leaving swim season extension on the table. Solar heaters can push your usable swim season into March and April in the spring and well into October and November in the fall. In San Antonio’s mild climate, that potentially means swimming for nine or ten months out of the year instead of five or six.

Myth five: Solar costs way more than traditional heaters when you add everything up.

This is the myth that matters most financially, and it’s completely backwards. Solar costs more upfront. Full stop. But operating costs are almost nothing compared to gas or electric heating. When you calculate total cost of ownership over the system’s 15 to 20 year lifespan, solar is dramatically cheaper than any alternative. We’ll show you the exact numbers in the cost comparison section.

What you can realistically expect from a San Antonio solar pool heater.

To get the best performance from your system, a few simple practices make a real difference. Keep your filter clean so water flows freely through the collectors. Run the system during peak sun hours, typically late morning through mid-afternoon. Use a pool cover at night to hold the heat your system generated during the day. And make sure your system gets sized correctly for your specific pool volume from the start.

That last point matters more than most homeowners realize. An undersized system won’t heat your pool effectively no matter how much sun you get. An oversized system wastes money on equipment you don’t need. Proper sizing from the beginning is where the whole investment either works or falls short.

Pro tip: Run your solar heater during late morning through mid-afternoon for maximum efficiency. That’s when collector temperatures peak and your heating gains are highest, which directly reduces your operating costs.


Different Types of Solar Pool Heating Systems

Once you understand how solar pool heaters work, the next question is which type of system fits your pool, your property, and your budget.

The good news is that the options aren’t overwhelming. There are a few key decisions to make, and understanding them helps you have a much more productive conversation with your installer.

Active versus passive systems.

This is the most fundamental divide in solar pool heating. Active systems use a pump to circulate water through the collectors. Passive systems rely on natural convection, where hot water naturally rises and cool water sinks, to move water without a pump.

Active systems dominate residential pool heating in San Antonio for good reason. The pump gives you precise control over when the system operates, how much water moves through the collectors, and how efficiently the whole system runs. You can automate it completely with a thermostat controller, and you can turn it off at night to prevent heat loss.

Passive systems eliminate the electricity cost of running a pump, which sounds appealing. But they’re generally less efficient, harder to control, and often more expensive to install due to specific placement requirements. For San Antonio’s variable spring and fall weather, active systems deliver more consistent results.

For nearly all residential applications here, active systems are the right call.

Flat-plate collectors versus evacuated tube collectors.

This is where most homeowners get confused by options that sound more complicated than they need to be for San Antonio’s specific climate.

Flat-plate collectors are exactly what they sound like. A dark absorber surface sits inside a shallow frame, covered with glass or durable plastic. Water runs through tubes bonded to that absorber surface, picks up heat, and returns to your pool. They’re the workhorses of residential solar pool heating. Affordable, durable, proven, and well-suited to San Antonio’s abundant sunshine.

Evacuated tube collectors use a more advanced design. Each tube contains a vacuum that dramatically reduces heat loss. This makes them significantly more efficient in cold weather and on cloudy days. They’re also significantly more expensive.

Here’s the honest assessment for San Antonio homeowners: evacuated tube collectors are engineering overkill for our climate in most cases. You’re paying a 30 to 40 percent premium for cold-weather performance that you rarely need here. Flat-plate collectors deliver excellent results in our sunny, warm climate at a much better price point.

Direct versus indirect circulation systems.

This decision comes down to one question: how cold does it actually get in San Antonio?

Direct circulation systems pump your actual pool water through the collectors and back to your pool. Simple, efficient, and less expensive to install and maintain.

Indirect circulation systems use a separate heat-transfer fluid that runs through the collectors. That fluid passes through a heat exchanger that warms your pool water without the pool water ever entering the collectors. This protects the system from freezing.

San Antonio’s winters are mild enough that freezing isn’t a serious risk for most installations. Direct circulation systems work well here and save you the additional cost of heat exchanger equipment. Your installer can advise if your specific property has any freeze exposure concerns.

Choosing the right system for your pool.

Three factors drive this decision: your pool’s size, your budget, and how long you want to extend your swim season.

The table below gives you a practical starting point:

Pool Size Suggested Collector Area Circulation Type Best Value Approach
Small (under 12,000 gallons) 200 to 300 sq ft Direct circulation Lower cost, easy to install
Medium (12,000 to 20,000 gallons) 300 to 400 sq ft Direct or active Balanced efficiency and cost
Large (over 20,000 gallons) 400+ sq ft Active preferred Maximum efficiency, higher upfront

Getting these numbers right from the start matters enormously for your long-term satisfaction with the system. A properly sized flat-plate direct circulation system for a mid-sized San Antonio pool represents the best combination of upfront cost, operating efficiency, and long-term reliability available.

Pro tip: Always request a professional sizing assessment before purchasing any system. An installer who sizes your system correctly based on actual pool volume and sun exposure saves you from both underperformance and unnecessary expense on the front end.


How Solar Pool Heater Installation Works In Cost

Understanding what actually happens during installation helps you know what to expect, ask better questions, and evaluate whether your installer is doing the job properly.

Here’s the complete process from start to finish when you have a system professionally installed.

Site assessment and system sizing.

Every quality installation starts here, before any equipment gets ordered or any work begins.

A technician visits your property to evaluate several things simultaneously. Your roof’s condition, orientation, and available unshaded space for panels. Your pool’s volume and surface area to calculate the correct collector sizing. Your existing circulation equipment to ensure compatibility with the new system.

South-facing roof space is ideal. In San Antonio at our latitude, collectors perform best when facing south and tilted at approximately 28 to 30 degrees. Most residential roofs in the area offer good solar access, but shading from trees or nearby structures can reduce performance significantly. A proper site assessment identifies these issues before installation rather than after.

Your existing pump and filter system also gets evaluated. In most cases, your current equipment handles solar heating integration without modification. Occasionally, older or undersized pumps need upgrading to push water effectively through the additional collector circuit.

Collector placement and mounting.

Most residential installations mount collectors directly on the roof. This keeps them out of sight, maximizes sun exposure, and uses space that isn’t being used for anything else.

If your roof has limited space, faces the wrong direction, or has significant shading issues, ground-mounted systems offer an alternative. Ground mounting costs slightly more for materials and labor but solves roof access problems effectively.

Proper mounting means secure attachment to your roof structure, appropriate flashing to prevent any water intrusion at penetration points, and precise angle and orientation to maximize sun exposure throughout the heating season.

Plumbing integration.

This is where your solar system connects to your existing pool circulation. The plumber runs pipes from your existing pool pump through the solar collectors mounted on the roof and back down to your pool return.

Several specific components go in during this phase. A check valve prevents water from draining backward through the collectors at night and creating heat loss. A bypass valve allows you to adjust how much water flows through the collectors versus returning directly to the pool. A thermometer or temperature sensor monitors your pool temperature and collector temperature to drive the control system. Pressure testing of all connections happens before the system goes live.

Getting these plumbing connections right is where professional installation really earns its cost. Improper connections cause leaks, reduce flow efficiency, and undermine the system’s heating performance. An experienced installer ensures every connection is correctly sealed and properly supported.

Control system installation.

The control system is what transforms a collection of pipes and panels into a smart, automated solar heating system.

Your thermostat or controller monitors two temperatures simultaneously: the temperature of your pool water and the temperature of your collector panels. When the collectors are warmer than your pool by a set margin, typically 5 to 8 degrees, the controller turns the circulation pump on. When that temperature differential drops, meaning the sun isn’t providing useful heat, the controller turns the pump off.

This automation prevents the system from running at night or during heavy overcast periods when collectors would actually be cooler than your pool water. Without this control, you’d be pumping heat out of your pool instead of into it.

Basic thermostatic controllers handle this job reliably for most homeowners. More advanced smart controllers offer remote monitoring and control through phone apps, detailed performance tracking, and more sophisticated temperature management. These features add cost but add convenience and can provide additional efficiency gains.

Testing and startup.

No installation is complete until everything gets tested under real operating conditions.

Your installer should run water through the entire system, checking every connection point for leaks while the system operates at normal pressure. They verify that the control system responds correctly to temperature changes. They confirm that water flows freely through all collectors without air pockets that reduce heating efficiency.

Before leaving, a thorough installer walks you through your control system settings, shows you where your bypass valve is and how to adjust it, and explains what normal system operation looks and sounds like so you can identify anything unusual in the future.

Pro tip: During that initial walkthrough, ask your installer to demonstrate exactly what adjusting the bypass valve does to water flow and temperature gain. Dialing in that setting during your first week of operation can meaningfully improve your heating results without any additional cost.


Main Factors That Influence Total Solar Pool Heater Installation Cost

The $4,000 to $7,000 installation range covers a lot of ground. Understanding what moves your actual cost within that range helps you budget accurately and make informed decisions about where to invest and where to save.

Pool size and required collector area.

This is the dominant cost factor and it’s straightforward. Bigger pool equals more collector area equals higher system cost.

A small pool under 12,000 gallons might need 200 to 250 square feet of collectors. A larger pool over 20,000 gallons could require 500 square feet or more. Each additional 100 square feet of collector panel adds several hundred dollars to your total project cost.

Your pump sizing also scales with pool volume. Larger pools need larger pumps to push water through longer pipe runs and greater collector areas effectively.

Collector type and component quality.

Flat-plate collectors at standard quality represent the sweet spot for San Antonio installations. Premium flat-plate collectors with higher-grade materials and better durability ratings cost more upfront but typically last longer and maintain better efficiency over time.

Evacuated tube collectors, as discussed earlier, cost significantly more for performance benefits that aren’t particularly relevant to San Antonio’s warm climate in most cases.

Installation complexity.

Your specific property determines how much labor the installation requires, and labor typically represents 40 to 50 percent of total project cost.

Roof type matters significantly. Asphalt shingle roofs are the most straightforward to work with. Tile roofs require more careful and time-consuming work to avoid cracking tiles during panel mounting. Metal roofs fall between these two in terms of complexity.

Roof condition also matters. If your roof needs repairs before panels can be properly installed, that work happens first. Your installer should identify any concerning roof condition during the initial assessment.

The distance between your roof and your pool equipment affects plumbing material costs and labor. A pool equipment pad 100 feet from the roof requires significantly more pipe and more installation time than one located just 20 feet away.

Older pool circulation equipment sometimes needs upgrading to work effectively with a solar heating addition. If your existing pump is undersized, aged, or failing, you’re better off replacing it during the solar installation rather than compromising your new system’s performance.

Here’s a breakdown of the key factors that move your cost:

  • Roof type: Tile or metal roofs add labor compared to asphalt shingles
  • Roof condition: Issues identified during assessment may require repair work first
  • Distance to pool equipment: Longer pipe runs add material and labor costs
  • Existing equipment compatibility: Older pumps or filters may need upgrading
  • Local permit requirements: San Antonio permits and inspections add $300 to $600 to most projects

Control system and automation level.

A basic thermostatic controller does the job reliably and costs a few hundred dollars. Advanced smart controllers with remote access, detailed performance monitoring, and more sophisticated automation can run over $1,000.

The automation investment is almost always worthwhile. A well-functioning control system prevents energy waste by ensuring the pump only runs when it’s actually helping. The efficiency gains from proper automation recover the controller’s cost over the system’s lifetime.

Permits and compliance.

San Antonio requires building permits and inspections for solar pool heater installations. This is non-negotiable, and any installer who suggests skipping permits is creating risk for you, not saving you money.

Permit and inspection costs typically add $300 to $600 to your project. They protect your home, ensure code-compliant work, and preserve your ability to document improvements properly when you eventually sell the property.

Pro tip: When comparing installer quotes, ask for an itemized breakdown that separates materials, labor, permit fees, and control system costs. This lets you understand exactly what you’re comparing between different proposals and make a truly informed decision.


Comparing Pool Heater Installation Costs: Solar vs Traditional Pool Heating

This is where the financial case for solar pool heating becomes undeniable.

When homeowners focus only on installation price, solar looks expensive. When you look at total cost of ownership over the realistic lifespan of the equipment, the picture reverses completely.

Installation costs side by side.

Solar pool heaters: $4,000 to $7,000 installed in San Antonio.

Gas heaters: $1,500 to $3,000 installed.

Electric resistance heaters: $1,000 to $2,000 installed.

On day one, solar costs more. That’s a fact. But installation cost is only part of the equation.

Annual operating costs are where the real difference lives.

A gas heater running during San Antonio’s heating season costs $200 to $400 per month in natural gas. That works out to $1,200 to $2,400 per year. And gas prices have historically increased over time, meaning your operating costs grow with every passing year.

Electric resistance heaters cost even more to run. In San Antonio’s climate, expect $2,000 to $3,500 annually in electricity costs to maintain comfortable pool temperatures with an electric heater.

Solar heaters? Your ongoing fuel cost is zero. The only operating expense is a small amount of electricity to run the circulation pump. That runs $5 to $15 per month during the heating season. Roughly $60 to $180 per year. That’s it.

What the numbers actually look like over 15 years.

Let’s use realistic mid-range numbers for a typical San Antonio pool.

Solar heater total: $5,500 installation plus $1,350 in operating costs over 15 years equals $6,850 total.

Gas heater total: $2,500 installation plus $18,000 in operating costs over 15 years equals $20,500 total.

Electric heater total: $1,500 installation plus $31,500 in operating costs over 15 years equals $33,000 total.

Solar saves you approximately $13,650 compared to gas over 15 years. Solar saves you approximately $26,150 compared to electric over the same period.

Here’s a side-by-side comparison to make this concrete:

Aspect Solar Heater Gas Heater Electric Heater
Upfront cost $4,000 to $7,000 $1,500 to $3,000 $1,000 to $2,000
Annual operating cost $60 to $180 $1,200 to $2,400 $2,000 to $3,500
Payback period 3 to 5 years No payback No payback
System lifespan 15 to 20 years 5 to 10 years 7 to 12 years
Emissions None Moderate High if grid-based
Annual maintenance cost $100 to $200 $300 to $500 $150 to $350

The payback period in real terms.

Most San Antonio homeowners hit their solar heater payback point somewhere between year three and year five. That’s when cumulative energy savings equal the initial installation cost.

After payback, you’re heating your pool for essentially free for the remaining 10 to 15 years of the system’s life.

Gas and electric heaters have no payback period. You keep paying operating costs every single month the heater runs. The expense never stops growing.

Lifespan matters more than most homeowners account for.

A gas heater typically lasts 5 to 10 years before requiring significant repairs or replacement. An electric heater runs 7 to 12 years on average. A quality solar pool heater lasts 15 to 20 years with minimal maintenance.

That means over a 20-year period, a gas heater owner potentially buys and installs two systems while the solar heater owner is still running the original. The cost comparison gets even more dramatic when you account for replacement cycles.

Maintenance costs add to the long-term picture.

Solar heaters need minimal maintenance. A filter cleaning, an annual inspection, and occasional minor adjustments represent the typical annual maintenance spend of $100 to $200.

Gas heaters require more regular servicing, replacement parts, and more frequent repairs as they age. Annual maintenance and repair costs run $300 to $500 for gas systems. Electric heaters fall in the $150 to $350 range annually.

Financial incentives improve solar’s numbers further.

Federal tax credits currently apply to solar pool heating systems. Depending on current program levels, this can reduce your effective installation cost by $500 to $1,500. San Antonio utility rebates may offer additional savings depending on current program availability.

Gas and electric heaters don’t qualify for these incentives. That means the gap between solar’s effective cost and traditional heating costs is even wider than the sticker prices suggest.

Pro tip: Before finalizing your solar decision, calculate your specific payback period using your actual pool volume, your current heating method costs, and your local electricity rate. Then set a simple calendar reminder at the 3-year mark to check your energy bills and confirm you’re tracking toward full investment recovery on schedule.


Maximize Your Solar Pool Heater Savings with Stultz Plumbing

You’ve now got the full picture.

Solar pool heaters work reliably in San Antonio’s climate. The technology is proven. The myths holding homeowners back aren’t based in reality. And the financial case over the life of the system isn’t even close.

The difference between heating your pool with gas versus solar over 15 years is approximately $14,000. The difference compared to electric is over $26,000. On top of that, a properly installed solar pool heater extends your swim season by months, lets you enjoy your pool comfortably in spring and fall, and does it all with zero fuel cost after installation.

But getting those results depends on one critical thing: proper sizing and professional installation from a team that understands San Antonio’s specific climate and pool conditions.

An oversized system wastes money on equipment you don’t need. An undersized system fails to deliver the temperature gains you’re expecting. Improper installation creates leaks, inefficiency, and performance problems that undermine the entire investment.

At Stultz Plumbing, we specialize in solar pool heater installation throughout San Antonio. We size systems correctly for your specific pool, install everything to code with proper permits and inspections, and back our work with transparent pricing and a commitment to getting it right the first time.

Don’t spend another swimming season paying gas bills or using a pool that’s too cold to enjoy comfortably.

Contact Stultz Plumbing today to schedule your free assessment. Our team will evaluate your property, size the right system for your pool, and give you clear numbers on what installation costs and what you’ll save. That’s the information you need to make a smart decision with confidence.


Frequently Asked Questions

What does a solar pool heater installation actually cost in San Antonio?

Most residential installations in San Antonio fall between $4,000 and $7,000. Your specific cost depends primarily on your pool’s size and the collector area required to heat it effectively. Larger pools need more panels, which increases both material and labor costs. Getting a professional assessment based on your actual pool volume is the most accurate way to know your specific number before committing.

How much can I realistically save on energy costs with a solar pool heater?

The savings depend on what you’re comparing against. Switching from gas heating to solar saves most San Antonio homeowners $1,200 to $2,400 per year in fuel costs. Switching from electric saves even more. At those savings rates, most homeowners recover their entire installation investment within 3 to 5 years and then enjoy essentially free pool heating for the remaining 10 to 15 years of the system’s life.

Do solar pool heaters actually work on cloudy days?

Yes, though at reduced efficiency. Diffuse sunlight on overcast days still carries energy that your collector panels absorb and transfer to your pool water. You won’t see the same temperature gain as you would on a clear day, but the system still contributes heating. In San Antonio with 220 sunny days per year, the cloudy-day efficiency reduction has minimal impact on your overall annual performance.

What maintenance does a solar pool heater require?

Very little compared to gas or electric systems. The main tasks are keeping your filter clean to maintain good water flow, having an annual professional inspection, and occasional minor adjustments to your bypass valve or control settings. Most homeowners spend $100 to $200 per year on solar pool heater maintenance. That compares favorably to the $300 to $500 annual maintenance and repair costs typical for gas heater systems.

JZ
Jean Dezonia
Co-Founder, AimSetWin  ·  San Antonio, TX  ·  (210) 560-3733

Jean runs growth strategy at AimSetWin, a performance marketing agency specializing in local service businesses across Texas. he's helped plumbers, HVAC companies, pest control operators, and home service brands build predictable revenue systems using data-driven advertising and conversion optimization.

Stultz Plumbing

From Clogged Drains to Full Repiping — We Handle It All

Water heater down? Drain backed up? One call fixes it.

Schedule Your Service Today
No commitment · Response within 48 hours

Plan 2531 Disclosure

Plan 2531. Subject to credit approval. Rates range from 17.99% – 24.99% APR. Loan amount and rate will vary based on your income and creditworthiness. 18 month promotional period (“Promo Period”) during which interest is billed but will be waived if the amount financed is paid in full before Promo Period expires. Monthly payments are not required during the Promo Period. Any unpaid balance and amounts owed after Promo Period will be paid over 84 monthly payments.

For example, assuming the full credit limit is used on loan approval date and no payments are made during Promo Period, for every $1,000 financed at a fixed interest rate of 24.99%, 18 monthly payments of $0 followed by 84 monthly payments of $29.77. This example is an estimate only. Actual payment amounts based on amount and timing of purchases.

Call 866-936-0602 for financing costs and terms.

GreenSky® program consumer loans are made by Synovus Bank, Member FDIC, NMLS #408043, without regard to age, race, color, religion, national origin, gender, disability, or familial status.

GreenSky Servicing, LLC (“GSS”, NMLS #1416362, www.nmlsconsumeraccess.org) is a financial technology company that manages the GreenSky® program by supporting originations and servicing the loans on behalf of banks and other financial institutions that make or hold program loans.

GreenSky® is a registered trademark of GreenSky, LLC and is licensed to banks and other financial institutions for their use in connection with the GreenSky® program. GreenSky LLC and GSS are not lenders. All credit decisions and loan terms are determined by program lenders.

equal housing lender